A Yeasty Fix

It’s common to hear stories from people about how they started a yeast starter but forgot about it and had to throw it away.

Another common comment is about how finicky people assume starters are.

Yes, there are some things to keep in mind and understand about yeast when keeping a starter. However it doesn’t have to difficult to keep a starter. And yeast is much healthier than most people assume. You have to remember that yeast is found in the air around us. It lives on our skin and is an invisible friend. It was created to survive in the same world that we live in.

One of the common misconceptions that I find people perpetuates in starting and feeding yeast is that you have to have a wet starter. Ever since I posted about keeping a drier starter, more and more people are talking about how they now keep a dry starter. And before I posted on my blog, I talked about this in community pages. In one thread a microbiologist agreed that it made more sense to keep a drier starter of yeast.

The benefit of keeping a drier yeast is that you do not have hooch (a liquid layer on top of your starter) by week’s end.

I firmly believe that hooch is an indication that your environment for your starter is out of balance. Excess water created a home for bacteria and mold to grow and ultimately lead to a situation where you have to throw your starter out. Once mold forms, there’s nothing you can do to resuscitate your yeast. That is the one kiss of death to starter.

And mold loves water.

If you keep your water levels in check, you don’t have to do anything else to prevent mold.

How can I state that with surety?

Let’s just say that the Christmas season was so busy that I forgot about my yeast for an entire month! Perhaps over a month… I last used my starter for Thanksgiving and forgot about it until after the New Year.

My Neglected Starter

If you pulled this out of your fridge what would your reaction be?

This “black” layer is hooch that is showing that my starter is sick and anemic.

Usually I remember my yeast when I haven’t used it for two weeks. It has this layer of hooch on it, but it’s clear. This is the worst that I’ve been a bad yeast mom. BUT I did not kill it.

My initial thought was, “well it’s a good thing I have a freezer yeast back up.” (There will be a future post on this. Now that I have four years invested in this starter, I want to make sure that I have a back up starter that I can fall back on Incase I really blow it and lose my main mother.)

The first thing I did was remove the lid, look for mold and sniff test my starter.

With no mold, I knew I could recover this yeast. And the sniff test confirmed that I hadn’t killed off my yeast. It still had a sour dough tang scent with no additional scent (which would be an indication of a colony of something different from my yeast). My starter smelt weak/anemic. And that’s because it was.

Advertisements

Recovery

The hooch is guaranteed to be where additional growth, competing with my yeast, is living. So first things first, I poured off all the hooch.

As you can see here, there was still some discoloration with the presence of left over hooch.

When I fix neglected starter I always start with a fresh/clean mason jar. I do this because everything about healthy and unhealthy starter is microscopic. I want to minimize the transfer of anything but the yeast I’m rescuing.

Since I don’t want to transfer this tainted hooch, I take a spoon and scoop out this liquid and the top layer of starter.

It’s important to remove the top layer because it was in contact with the pooled hooch. It will be the part of the starter that has the higher counts of any of the foreign colonies (if any is present).

If you want to be extra careful about to continuing contamination, you’ll want to make sure and use a clean spoon with each scoop.

Advertisements

I didn’t take a picture after the first scoop, but this is after a couple of scoops. As you can see in this above picture, there is a distinct color difference between that sickly top layer and this more beige color.

This color difference is a good indication of what needs to be removed and what can be salvaged.

The white layer was watery, pasty, and had every indication of “do not keep me”. The beige layer beneath had a cake batter like texture and looked “healthier” even if this rich color is darker than the color of my normal starter.

Nature is good with communicating information by using layers. So I follow what my yeast tells be and grew confidence that I could absolutely save this starter without having to get the yeast out of my deep freezer and hope I could make that work.

Now that I had the information I needed, I finished scooping out all the left over hooch and the white layer.

With everything removed, I grabbed my clean jar and started scooping out starter from this jar and depositing it in the new jar.

Because I wanted to minimize anything that might be deeper in the jar, I only scooped out starter from the center. I was careful not to get starter from the sides of the jar or from the bottom.

The top left is the old jar. The bottom right is my new jar transfer.

Normally I try to transfer as much starter as I can scrape out of the jar. This is an instance where that was not going to happen. Again, my goal here was to stay away from any potential starter that was exposed to the hooch.

The good news is that even if all you have to transfer is a couple of soup spoons worth of starter, that’s enough to recolonize a starter.

The amount of starter that I estimate I put in the clean jar was maybe 1/4 Cup. (I’m not as confident about guessing how many grams as this is the unit of measurement that I didn’t grow up using. However because I use the metric system for bread making, 50-75 grams is definitely more than enough to restart your starter for the ability of having enough yeast in your colony for bread making in a day or two.) Even the tiniest amount of transfer starter is enough to get you going again. Just know that until you build your colony up, your raise time is going to be slow and weak. You do have yeast, it will just take time to build your numbers back up.

Advertisements

Next I added salt into the yeast that I just transferred. As you can see above, I used about a teaspoon worth.

In Meet Frankenstein I talked about the gluten free starter I made and how I had to bring that one back to health. That starter had a different issue that I was resuscitating it back from, but the treatment is still the same… salt. The reason why salt is your first aid for wild yeast starter is because the salt creates an environment that decreases the growth of everything that is competing with your yeast colony. And at the same time salt does not affect the growth of your yeast.

At a previous time I had used 2-3 teaspoons of salt for a starter that was healthier than this one. My starter bounced back quickly. It made my first batch of bread excessively salty. (So make sure that your first bread after a treatment cut back on the salt.) Even still there was no negative effect of the salt on my starter. So don’t feel like you can be too heavy handed. I still wouldn’t put in an absence amount. First you just don’t need it. Second, if you treat all your kitchen resources as valuable (whether they become scarce or just because it frees up a few cents to put elsewhere in your budget) you just use what you need to use to get the job down.

Now can you use too little???

I haven’t yet experimented on how little you can get by to bring your yeast back into health. Here’s what I would look for though if I suddenly ran out of salt and only had a pinch to put in. If my yeast became discolored, hooch formed again, if the hooch is not clear, there is an off scent to your starter… add more salt.

Once the salt is in the jar, give the starter a good stir. This gets the salt where you want it working. If you feed your starter first, the salt is going to be diluted.

When I first started on my journey with a starter I noticed that I don’t stir as thoroughly as I thought I did. Originally I ended up with starter kept on the bottom of my jar and hydrated flour on the top of my jar. That’s another story for another day. But that’s how I came to understand that just because you have a consistency that you think is right, it doesn’t mean that you thoroughly stir and blended everything.

So that is why when I treat with salt, I treat my starter first. Then I feed it.

After the salt treatment I start my feeding process. Water first!

I changed the way that I feed my starter. I now start my feeding with water because this dilutes yeast and ensures that it’s fully incorporated throughout the fed starter. There is no second guessing if I’ve stirred enough to completely incorporate the yeast into the flour. The colony is spread out entirely through all of the water. So when I stir in the flour, everything that is wet has yeast.

Advertisements

As you can see here, there is no doubt that my starter and water are fully incorporated. And it just takes a couple stirs, less than my eggs take when I scramble them.

Bread Recipe That Hasn’t Failed Me is the post where I share my bread recipe that I always use. And since I know how much starter that I need to make two loaves of bread, I know exactly how much to feed my starter. I use 300g so when I pour the water, I aim for 150g. And that means that I also start off with 150g of flour. Once I have that measurement in my mason jar I stir it and check my consistency. Depending on the humidity levels in my house, I tend to always add about 15-20g more flour. This gives me a thick brownie batter consistency. When I keep my starter with this thicker consistency I never have hooch (unless I neglect it for longer than 2 weeks–and that error is on me).

And as you can see with the picture on above right, I stir my flour in just enough to incorporate it into the yeast water. The flour is the food for the yeast, so as long as the yeast water is connected and mixed in with the flour the yeast will find its food and go to town.

As a little side note, I make bread one to two times a week. By the time I get to my yeast, these flour lumps are no longer there. The flour continues to hydrate during the rise time.

I keep my yeast in a quart jar. After a feeding, my starter fills around half the jar. I don’t keep a rubber band around my jar because I know that my yeast is ready when it reaches the top of my jar.

As you see here, my yeast still needed to rise a bit more. But the time in my day was running out and needed to make my bread dough, so I cut my time short.

TIP: My mom hack for making bread with no time to do it during the day is that I make my dough after dinner (right before I start to relax for the night), put it in my bread molds, and let it proof in my oven over night. When I wake up in the morning I turn on my oven (without touching my bread and deflating my rise) and let it cook. By the time lunch comes around, my bread is cooled and ready to slice.

Normally, when I leave my starter out on my counter to double, it takes anywhere from 1-3 hours depending on how cool my house is. When I took the above picture (directly before making a batch of bread) 9 hours have passed and it really could have used another hour our two.

My starter took this long to grow even that much was because the yeast was weak from being neglected. This didn’t concern me. I would have been concerned if there was no rise at all. But obviously I have yeast in there and they were doing their job.

I took a picture of the top of the jar, with the only thing I did was remove the lid, so you could see that there was no hooch. There was no discoloration. This picture tells you nothing as far as smell. But it was predominantly the sour yeasty smell. BUT there was also a flour smell to it. You will notice this flour note when you first feed your starter because you have unprocessed flour in the jar. The fact that the yeast had grown and ate the flour, the smell of flour tells me that the yeast is still weak and the flour hasn’t been all eaten up. This doesn’t raise any red flags. It just tells me that I should expect my proofing to take longer than if my yeast is healthy and happy.

Advertisements

What to Expect After Treating Your Yeast

As I mentioned above, the first thing you should expect is that your yeast is going to take longer to double. I mentioned that my yeast, in my home, normally takes 1-3 hours to double. If I feed my yeast and immediately store it in my fridge, it will double in about 3 days.

Because of how long it took my yeast to double after this treatment, had I put it in my fridge after feeding, it probably would have taken a 5-7 days to double. My guess is about 5 days because that’s how long it took when I treated my starter before after 2 weeks of neglect.

The point to this is that you should expect your yeast to double over a much longer time. There’s nothing wrong with your yeast. It just takes it a hot minute to start eating and doubling its colony population.

Once your yeast has come to a usable stage, the next thing that you should expect is that the flavor is going to be off. If your starter has a sour smell and flavor to it, this first doubling time is going to make it milder

almost no sour flavor

The mild flavor isn’t going to be an issue. What will be an issue is the fact that you will be able to taste the salt that you used to treat your starter.

If you choose to use your starter as usual, and keep true to your recipe, you will most definitely taste that your bread is more salty.

The time that I aggressively salted my starter and used my bread recipe as usual, the bread was inedible for sandwiches. I had to use the bread differently–namely as grilled sandwiches and as bread cubes or crumbs for a recipe.

INSTEAD go ahead and alter your bread recipe up front.

With the bread recipe that I use, I now immediately halve my salt portion of the recipe. So instead of using 22g of salt I use 11g. By doing this there was no change in the saltiness of the bread. It tasted normal.

I know that most people don’t taste this difference that I do, but using treated starter in a bread recipe (even when you cut back on the salt portion of your recipe) tastes exactly like the dry active yeast that you buy in the store. I’ve always had this problem with the flavor of bread from conventional dry active yeast. I always had to add herbs to get a bread that tasted good (garlic, onion, oregano, rosemary, etc.).

In the same manner, with the bread that I made with this recovery from a month long neglect I had to add ground herbs. So in addition to the dry ingredients that are in the bread recipe, I added:

(Herbs were from my garden this year and dehydrated for winter use)

  • 1 tsp ground oregano
  • 1 tsp ground rosemary

And for the salt portion of the recipe I used garlic salt instead of standard salt.

I mention this because I want to inspire you to use other ingredients with your bread making, especially when you’re compensating for weak/recovering starter. These herbs do nothing to change the function of your bread rising. But it absolutely makes your bread more enjoyable.


Do you have any questions about the starter that you’ve been keeping? Comment below.


Links to previous bread and yeast related posts:

Valuable Resources

If you have limited resources or want to know how to make a no discard starter, this post will get you started.

Bread Recipe that Hasn’t Failed Me

I share with you my favorite bread recipe as well as how to make pull apart rolls.

Meet Frankenstein

If you’re looking for how to make a gluten free starter, here is how I made a starter from potatoes. I also share with you how I overcame my first major obstacle with creating a starter.

Leave a comment

Processing…
Success! You're on the list.
Advertisements
Advertisements
Advertisements
Advertisements

Make a Reusable Food Wrap

This past week I just had my application to a local Maker’s Market accepted. (If you’re unfamiliar with Maker’s Markets, think Farmer’s Market with a little more lean toward the things that you make.) One of the products that are on my list to sell is reusable beeswax wraps.

I’m super excited to present this item, not just at the market but also here because this is a traditional item that was used before the convenience of plastic that will it doubt come into popularity again.

There are so many reasons why you might be interested in how to bring a reusable wrap into your home. Maybe you’re budget is tight and $5-20 saved in a grocery trip means something to you. Or your family could be one who is looking to reduce the amount of plastics that are used and thrown away in your home. Perhaps you or a loved one is facing a health moment that requires you to reduce the amount of chemicals that are used in your home. Or maybe there is another reason that stands out in your mind.

Beeswax reusable wraps can meet those needs and many others because it’s made from very few ingredients; 100% cotton or linen cloth and beeswax are the two items that you have to have to make this. I also include pine resin (for additional tackiness) and jojoba oil (for flexibility that prevents the wax from cracking)

Originally I wanted to make these wraps for my family because half of our glass bowls do not have lids. And all of our lid bowls always seem to be in use and unavailable when we need something with a lid. So I have more usable bowls, but I can also meet other needs in my kitchen: my homemade bread won’t dry out on the cut end, less chemicals are being transferred into our left over foods, takes up less space than Tupperware, and easy enough that my kids can use them.

While listening to others who’ve been making these for years, I learned about a few other beneficial features. When the wax wears thin, these wraps have not met the end of their life. You can reapply the wax (or wax/resin/oil combo) and 5e wraps are just like new. But if the cloth itself becomes damaged, the wrap can be composted because there are no synthetic materials that are used.

Advertisements

How to make or revitalize a previously used wrap

There are a few different methods of making these. So please don’t think there is one way. Find a method that works for you and makes sense with the resources that you already have available in your home.

The oven method. You place your cloth on a cooking sheet, with your wax of choice (plain beeswax or a beeswax combo) scattered across the top of the cloth. Your cooking sheet is placed in the oven, around 200 degrees F, until the wax melts. You then use a brush and make sure to spread the hot wax evenly across the cloth.

I did not use this method because none of my cooking sheets have a lip on them. So I would end up having wax in the bottom of my oven. And I didn’t want to buy new cooking sheets just to have them for crafting. I don’t have the space to store them or the money to buy them. So I went with a different method that I already had the resources for.

Advertisements

The water bath method: I used one of my small saucepans and filled it halfway full with water. I pulled out a hot water safe container to put my wax combo in, and then set that inside the saucepan. It took a bit of time for the water bath to melt my beeswax and pine resin, but that step was a success. What didn’t work for me was pouring the wax combo on the cloth or dipping the brush in and brushing the fabric. This method was a fail for me because my brush clotted with the wax as it cooled. There was no way to warm that up to turn it back into a liquid or to clean my brush. I know some homesteaders who love using a brush when making beeswax wraps. I’m not one of those people. But I did try it.

The Ironing method: I’m going to walk you through the steps of this method below. This one takes a few additional manufacturing items to make. But once I was set up I didn’t have to prep anymore. And I kept making wraps until I ran out of one of my ingredients. This is not a zero waste method. However it is the method that minimizes the loss of wax ingredients and is the easiest to clean up.

Prepping for the Iron Method

Before setting up my work table, I needed to get my ingredients ready.

I buy my beeswax from local bee keepers. That means I generally get the wax in a brick form. And whether I’m using the wax for wraps or other products I make, I have to great it down to make the melting process a little quicker.

Foraging pine resin is on my to-do list. I have not done that yet. So I purchased pine resin. It arrived in a bag of crystalline chunks. Resin takes a higher heat to melt than beeswax, so I needed to crush the resin to minimize its melt time. The quickest way to do this is put some resin in a paper bag and hit it with a hammer until the resin becomes as small as you want it. (Powder is ideal for this method.)

What I learned when crushing resin— when you hit it properly with a hammer, the resin is going to break through a paper bag. If you use the wood handle you keep the bag pretty much intact, but the resin is let going to turn all the way into a powder. But if you use the side of the hammer (the largest flat surface of the metal portion of the hammer head) you maximize the amount of resin turning into power with very little resin escaping out of a crack in the bag.

With the ingredients ready to go, the next step is to set up your work station. Half the videos I watched had crafters working on exposed countertops. I DO NOT recommend going that route. The short story is that the wax combo got on my table. Fortunately I have my tricks to lifting wax off of my table. And I will not be doing that again!

So learn from my mistake and find an old towel that you do not mind using for crafting purposes from here on out. Shop rags are amazing for this. I just didn’t have any that were large enough for me to make my Rage wraps on top of. So I decommissioned a towel.

Since I knew I was going to work on my large wraps, I grabbed that size of cloth and set it on my towel. From there I sized out 2 long sheets of parchment paper with a few inches of over hang on all sides. (Your wax is going to spread and needs this buffer to keep the wax off your iron.)

The wax is going to slide through the sheets of parchment. To prevent this I taped my sheets together. This time I used a packing tape. And once I taped the parchment together, I flipped it over so that the tape side was down on the towel.

I placed the cloth that I’m making the wrap out of on top of this bottom sheet of parchment. Then I made a second double sheet of parchment to place on top of the fabric. This time I kept the tape side face up. And to keep the iron from melting this tape, I placed one single sheet of parchment over the tape.

Now it’s time to make a wrap!

Preheat a clothing iron to the highest/linen setting. Even if you’re working with cotton, don’t be afraid to use the highest setting. The wax, and especially pine resin, needs the heat to turn into a liquid and for you to work quickly.

In a cup I weigh out equal parts of beeswax and pine resin. (If you’re making just beeswax, there’s no need to measure the ingredients unless you figure out the precise amount of wax you need for the size of cloth you’re working with.) Then sprinkle your ingredients all over the face of your cloth.

Cover with the top layer of parchment paper and start to iron.

If you are using resin, and used some small shards instead of all powder, you will want to show patience up front here. Set the iron down on top of the stones and wait while the resin melts. If you immediately glide your iron back and corn, the resin shards are going to rip the parchment and then all the waxes are going to end up on your iron face.

As you can see in this middle picture, below, you will see your waxes through the parchment. This is useful because you will get a general idea of where the wax is in comparison to the edge of your fabric. Work in the center and push the wax out to the edges.

There will come a moment when you think you have the wax spread over all the fabric. Lift the parchment and take a quick leak. No matter if you’re working with light or dark fabric, you will be able to notice where I here are patches of fabric that have not been covered with wax. In the third picture above you will notice the white fabric that has obviously not been covered by the yellow tint of the beeswax.

If there are still pools of was on the cloth, lower the parchment paper and use the iron to push the wax over to those blank spaces. If the fabric seems a bit “dry”, with no extra wax to move around, add a little bit more wax over the dry spots, lower the parchment, and melt the wax into place.

Once you’re satisfied with your coverage, take a look at the amount of wax present. You want just the right amount where the fabric has a matte like finish too it. If it’s shiny or has pools of wax, you will want to absorb that excess wax off. You can do this by placing a new piece of fabric on top, lowering the parchment and ironing over the entire surface of the new cloth. Once all the excess wax has been absorbed, you can pull out the first cloth (and leave the second cloth to add more wax to any dry parts.

When a cloth is finished, pull it free from the parchment papers, hold it by the corners and wave the cloth back and forth. You want to cool down the wax before you set it on something to finish drying. (I use chair backs.)

A Pine Resin Problem to be Aware of

One bit of information I didn’t hear from anyone is a potential problem to look out for when working with pine resin. If there is a spot where the resin is not in equal parts with the beeswax, it’s going to act like glue to the parchment paper.

The first sign of this is when you go to lift the parchment paper and it feels like it’s locked in place. You didn’t do anything wrong and nothing is ruined. All you have to do is iron over that spot. When the resin is hot again, you can lift the parchment paper and it won’t be stuck anymore.

If you try to force the peel, the parchment will rip. And if you’re not done making wraps, you will want to take a new sheet of parchment to cover the holes and rips. It’s just easier to get the resin hot again and then peel the parchment back in one piece.

Caring For Your Reusable Wrap

Everything about a beeswax wrap is oil based and meant to manage moisture. It keeps food moisture in and humidity out. Because of this feature, you absolutely do not want to use a grease fighting detergent when cleaning a wrap after use. You can use a gentle soap and the wrap will be fine. However grease lifting detergents are going to break down the wax and fat molecules in the wrap, which in turn will wear down the wax and make it less effective in holding to itself and your kitchen equipment.

Remember, we used heat to set the wax on the cloth. Hot water will warm up the wax and makes it easy for the wax to be removed from the fabric. So when you wash or rinse off a beeswax cloth, keep the water tepid. By keeping the water temperature cool, you will prolong the life of a beeswax wrap.

Advertisements

There are some things that you absolutely do not want to do with a beeswax cloth:

  • Do not use in a microwave.
  • Do not clean in a dishwasher.
  • Do not leave onto of a heat source (in a hot car, on a sunny and hot windowsill, on any heat source).
  • Do not use to store raw meats.
  • Do not use with hot foods. Cool them down safely and then cover cold food with a beeswax wrap.
  • Do not leave in standing water.

When properly maintained, beeswax wraps are absolutely safe to wrap your foods in. Beeswax has antimicrobial properties. Depending on how you care for a wrap, it is possible for one to last a year or several.

Advertisements

A Couple Ways to Use a Beeswax Wrap

As I mentioned before, I wanted these to use on bowls that I do not have lids for. In this example I have a standard glass coup bowl and my small wrap. Simply place the wrap over the bowl. Then press the wrap down much like a sheet of press and seal food wrap.

The heat from your hands is what softens the wax. Its tacky nature naturally sticks. To be fair, the wrap sticks better to itself over the smooth edges of a glass bowl.

I found that just pressing the wrap down formed less of a seal and more of a fitted cap of a lid.

For better results, crease the wrap and seal it on itself. As in the case of this bowl, the folding of the fabric and making it taper down the side of the bowl, this tapering down gives the resistance for the wrap to stay firmly secure to the top of the bowl.

But the wrap doesn’t need to have a structure to seal up. You can have the wraps become its own container and never have to buy a sandwich bag again.

Simply lay your sandwich in the center of a wrap and seal it to itself.

In the second picture, I folded the bottom of the wrap up and pressed the fabric down the sided of the sandwich and pressed the fabric into itself to create a seal. The sides I folded over over and the top down.

In this last picture, I wanted to show you that even when I stood the sand which up, it did not unwrap himself at all!

Again, these are only a couple of ideas on how to use these. Another idea is on a hiking trip. If you forgot to bring a foraging container, but saw something you wanted to gather, you could pinch together the sides of a wrap and make a little basket.

This is genuinely one of those kitchen utensils that have many uses and are user friendly.

For those of you who are local, come by the Maker’s Market on October 7th and you can play with the demo wrap and see just how user friendly these are!


Leave a comment

Processing…
Success! You're on the list.
Advertisements
Advertisements
Advertisements
Advertisements

Make Your Own Bullion

With the growing list of food ingredients that people become sensitive to, it’s easy for families to kind of go numb reading ingredient lists. Not only is it difficult to read the chemical name of some of the ingredients (let alone answer the questions, “Why is this in here?”), but some families are now asking, “What isn’t listed?”

For example, natural flavoring is listed as a single ingredient but can actually incorporate up to 200 different ingredients. It’s a shady practice, because it could be something as simple as a proprietary blend of herbs. Although it’s more likely the summation of chemicals used for extractions of certain elements for flavoring. But how is a family to know what chemicals or processes were used and make the educated decision if this is something that is harming the health of a loved one?

So whether you’re looking to cut some corners in your grocery budget, trying to eliminate ingredients in your diet, or simply wanting to eat more simply (knowing exactly what you’re cooking with, able to say the ingredients, and other reasons) you can make basic kitchen ingredients from scratch. Bullion is one of those ingredients that you can make in advance and have it in your pantry waiting for you to use!

Advertisements

First Make Your Stock

I’m going to move forward here with making chicken stock and turning it into chicken bouillon. However you can do this by making your own beef stock or vegetable stock. (And I just want to say that when you make your own vegetable stock, it actually has more flavor and tastes a thousand times better than what you will buy in your local grocery store!)

There are also a few different ways that you can cook your stock. You can make stock on stovetop, in a slow cooker in your oven, in a crock pot, or a pressure cooker. The only difference is going to be the amount of time you commit to. With the exception of the pressure cooker, you will want to cook low and slow to release all the nutritional benefits of your ingredients. A lot of influencers, bloggers and You Tubers will encourage you to make a stock in a short amount of time. Of course it is possible, but I want to encourage you to take the time and cook your stock ingredients out.

If you’re making a bone broth, cook it so that you extract the marrow from the bones. If you’re cooking vegetables, don’t assume that because you’re not extracting marrow that you can get by with less time. Check out my post A Touch Bitter? where I specifically talk about vegetable stock.

You know that you have a good and flavorful stock when it has rich and dark colors. The color comes from all the nutrients that you cook out from your original ingredients.

Advertisements

My Chicken Stock

I’m going to be honest with you here, daddy taught me how to cook by following a recipe. But I inherited a wild cooking hair from mom, where we improvise. I cook by smell, then by flavor, all over what a recipe says. I’m working hard to make notes on my recipes to find a strong base that is pretty average for how my recipes go. Just know that when I have chicken bones to use, I literally use the ingredients that I have on hand. And just like your kitchen, there are ingredients that I run out of. I don’t go to the store for missing ingredients. I run with what I have.

Here’s what I have standard in my kitchen:

  • onion skins (kept in a vegetable food scrap bag in the freezer)
  • garlic skins (vegetable food scrap bag)
  • stems of herbs that dehydrate to make my own dried herbs (vegetable food scrap bag)
  • dehydrated herbs from my garden (oregano, basil, lemon balm, sage, parsley, chives and others)
  • dehydrated herbs that I have yet to successfully produce in my garden (ginger, tumeric and others)

General Recipe

In my 8 quart instant pot I add:

  • the bones of one whole chicken fryer
  • if the chicken came with gizzards, I cook the gizzards here in my stock.
  • the vegetable food scraps from my freezer (ideally I aim for the skins of about 4 onions, the skins of 2-4 garlic heads, half a bunch of leafy herbs)
  • herbs from my seasoning shelves (including salt and pepper)
  • filtered water that fills my pot up to it’s Max line.

The herbs are generally where I run out of supply and have to improvise. If I have everything the herbs that I like to add are:

  • Ginger
  • Bay leaves
  • Lemon balm (fresh will give you more of a lemon flavor, dehydrated will have more of a green tea lemon flavor, use according to which type you’re using. I like going heavier on the fresh lemon balm)
  • Rosemary
  • Oregano

These herbs I go heavy on. If I’m out of any of these, I improvise using other herbs. Sage I use sparingly because it’s such a potent herb. Cilantro I use sparingly because I have family members who dislike the flavor of this herb. So I keep this one low in quantity to still get the nutritional value, but the flavor is not prominent at all. Fresh cracked pepper I use in varying levels depending on what my stock is currently at. Salt, I try to remember to add, but half the time I forget. Because the flavor of salt is not extracted, like herbs, I have no problem seasoning with salt once my pressure cooking is done.

I set my instant pot to pressure cooking, on high, for 3 hours. (No matter which stock type I’m making, I don’t ever go less than 3 hours.) This is what gives you full extraction.

Making Bullion

Once your broth has finished processing, you strain out all the ingredients. With a vegetable stock, I go ahead and compost the vegetable bits that I strain out. With bone stock I strain out all the bones and vegetables and they are thrown out.

If you’re making vegetable bullion, you can cool your stock down to room temperature and then move forward with the next step. If you make a bone broth (chick, beef, venison, goat, sheep, etc.) you will need to cool your broth off over night in your refrigerator. The exception is if you have a fat skimmer that can separate the fat out from hot broth. I do not. So I refrigerate my stock over night.

Once the fat layer has formed on your chilled broth, you skim the fat off of the broth.

You have to skim off of the fat, because when you make bullion you want to have a long shelf life. Fat is the limiting factor in shelf stable food. It will go rancid before anything else goes bad. So by removing the fat, you ensure that you have a long shelf life for your bullion.

When my chicken broth is been skimmed from fat, I grab my jelly roll trays for my dehydrator and set my dehydrator up where it’s going to process the broth. The reason why I set my dehydrator up in location and fill the jelly roll trays on the stacked racks is because the broth is going to run to lowest point. There is not going to be an even layer of broth. So I fill in place and pour the stock until I reach the lip at one point on my tray. This will maximize the amount of broth I can process at a single time.

Dehydrating liquid hack: before placing your liquid on the jelly roll trays put it in a sauce pan and reduce the stock. By evaporating the liquid down, you will cut down on your dehydrating time and save space in your dehydrator.

I run my dehydration temperature at 140-145°F until the broth is crispy like this. Dehydration time is going to vary depending on if you reduced your broth first, the temperature you dehydrate out, and most importantly the thickness of where your broth pools. The thicker sections will be gummy to touch until it’s properly dehydrated. The thinner bits you can leave as is. Or when you check on your progress, you can used a silicone spatula to push the thinner bits in closer to the thicker bits (this makes it easier to remove the thinner sections when you’re finished dehydrating).

In the center of my jelly roll try, you’ll see that I put my coffee/herb grinder in the center. It makes it easy to brush the chunks and bullion dust into the grinder. When the container reaches its limit I remove the tray, cap the grinder and run it for about 10 seconds. Just long enough for the broth to turn into a powder. The bullion powder I put directly into my mason jar that I’m going to store it in.

Just so you won’t be alarmed, what you see in this 1/2 pint size jar is what my 8 quart size instant pot produces. My first time making my own bullion, I was disappointed that it didn’t make more. But that disappointment disappeared when I tasted the bullion. You will not be disappointed with the intense flavor!

This is perfectly save to keep in your pantry or in your spice cupboard.

Personally I have a tiny kitchen, so I keep my bullion on the top shelf of my fridge. The bullion usually doesn’t last my family a year. Although there was a time where I needed to free up some jars and use my canned chicken stock, so I had one batch of bullion powder in my fridge for about 2 years. It was still fresh and flavorful when I went back to finish this bullion off.

Comment below and tell me how you like this space saving flavorful bullion.

How does it compare to what you’ve previous bought from the store?


This post contains affiliate links to products. We may receive a commissions on products purchased through these links, but at no extra cost to you. These items listed here are from Amazon but may be purchased at local markets.

If you don’t have a current dehydrator and are looking for one, I have been very pleased with this dehydrator. This was an upgrade from my very first dehydrator, but still on a budget. If you’re in a tight financial place, with today’s economy, this is the one that I highly recommend. Not only was it a great price, but it also included jelly roll trays for each rack (something that can’t be said with other budget units)

Herb Grinder Elictric has been great for keeping all the ground herbs/boullion contained in the grinding bowl.

Processing…
Success! You're on the list.

Leave a comment

Advertisements
Advertisements
Advertisements
Advertisements

End of Season Green

I considered waiting to share this post until the fall, but then I thought why not now. This is the perfect idea to share now while you’re still deciding what you are putting into the ground or containers for this growing season.

If you have some tomatoes planted and wondering if you should plant more, the answer is a resounding yes!

I’ve mentioned before that last year, the growing season here in the Pacific Northwest was horrible. Nothing really took off until the end of June and the beginning of July. And I was concerned with my tomatoes. If fact, the above picture was the last of the tomatoes that I took off the vine at the beginning of October!

As you can see, there were so many green tomatoes that I still had, but my plants were dying off. So instead of all these beauties, I brought them inside and found a recipe that has now entered my MUST make every year when I bring the tomatoes in.

But I wanted to share this recipe with you now, because this is worth planting the extra tomato plants that you’re debating about adding to your garden.

If you’re like our families, you grow enough tomatoes to make your tomato sauce, pizza sauce, tomato soup, salsa or other tomato product you store for the winter. (This year I’m going to add making our out ketchup and tomato paste.) You definitely want to add Green Tomato Relish to your list!

I tried this last year not just because I had a plethora of green tomatoes, but also because my husband loves relish and I hate pickles. So I gave this a test drive to see if I could make something that is on his list of condiments and yet is something that I will eat as well. And I tell you that this hit the spot for everyone!

Advertisements

OurHalfAcreHomestead Green Tomato Relish

Mrs. Volfie posted her Green Tomato Relish here, but for your convenience I’m leaving the directions she walks through below. Please note, that if for your first time you don’t have the celery seed in your cupboard you are still going to have an amazing relish without it. I now have celery seed in my kitchen so I can’t wait to see how much better it turns out.

This is the vegetable ratio that Mrs. Volfie talks about in her recipe. You can mutiply it according to how many green tomatoes that you have.

  • 2 C Green Tomatoes, minced
  • 2 C Onions, minced
  • 1 C Sweet Peppers, minced

The Base for this recipe is 5 Cups of produce.

As you can see here, I used red onions instead of the yellow onions that Mrs. Volfie used. They are just my personal favorite onion, but please feel free to use the onions that you have on hand. I also want to mention that I was about a half cup short of the minced peppers and I still instantly fell in love with this recipe. Just remember that if you’re light in one vegetable, you should try to make up for it with one of the other vegetables.

I didn’t and I ended up with a slightly wetter finished product than I would have liked. But that is okay. Having run this recipe and knowing what the outcome is and what my personal expectations were, I know that this next batch that I make, I’ll make sure to keep that 5 Cups Base ratio and I’ll go a little lighter on the liquid, but I’m ahead of myself.

Let’s move forward.

This is a 2 day project. On first day, you’re going to mince your vegetables and let it sit over night. The next day you’re going to cook and bottle or jar your relish. And as a busy mom, I sure do love recipes that I can break up into steps like this and not have to take an entire day to run a canner.

Advertisements

Day One

  1. Mince your vegetables to make up your Base Unit. (In the video Mrs. Volfie made a triple batch, which is a total of 15 Cups of produce.) I didn’t have the chopping tool that Mrs. Volfie used, so I minced by hand.
  2. Combine your vegetables and add 2 Tbsp of Pickling Salt. If you are running less or more of a Base Batch, you may need to adjust the amount of salt used accordingly. (The purpose of the salt is to soften the vegetables but also reduce some of the water content.)
  3. Put the raw relish in your refrigerator overnight.

Day Two

  1. Strain and rinse off your relish.
  2. Put back into the pot and add the following. (This is for a triple batch, so please adjust these ingredients according to the Base Batch of recipe that you’re running.)
    • 2 C Sugar (Mrs. Volfie mentions that she prefers brown sugar. I just used cane so can’t comment on the difference in flavors.)
    • 2 C Organic Apple Cider Vinegar
    • 2 tsp. Salt
    • 1 tsp. Celery Seed
    • Fresh Cracked Black Pepper
  3. Bring to a boil on your stovetop.
  4. Fill hot jars or bottles with the relish with 1″ headspace and de-bubble.
  5. Hot Water Bath the relish for 15-20 minutes.

For Christmas, my husband and I gifted this relish to friends and loved ones. And everyone came back raving about it. Not only that, but have talked with their loved ones who are also interested in this relish.

You won’t hear this in the video, but I would be remiss if I didn’t tell you that this relish makes the BEST tartar sauce just by mixing in your favorite mayonnaise. Everyone I’ve told that to in person just gave me the humored head nod that said, “so you say. I might give it a try.” Everyone did try and they came back with fireworks in their eyes.

Living in the Pacific Northwest, we are spoiled with fresh seafood. So of course when anyone talks about tartar sauce, people get a little snobby. But please, please, please, give this a try. Because I have yet to have someone come back to me and tell me that it did not hit the spot.

And if you are planning a special event, are a caterer, and seafood is on the menu I am telling you that this one condiment is the way to wow your customers and come back with glowing revues!

Advertisements

Other recipes that may interest you…

I have not yet tried these recipes, but these are on the top of my to try list.

Ketchup

The ingredients on this recipe from Self Sufficient Me sounds about right for what I look for in a ketchup. The written recipe is found here.

There is one glaring issue that I have with this recipe by watching the video is that it is too thin and liquid based for the type of ketchup my family likes. The culprit for this being so runny is that he runs his tomatoes through a food processor at the very beginning.

I was teaching a small class on how to make tomato sauce and we found out the hard way that when you process tomatoes like this you just can’t ever get that sauce to thicken up! The reason for this is because there is a chemical in the skin of tomatoes that when you release (by blitzing the tomatoes) it counteracts the pectin that is naturally in the tomatoes. You end up with tomato juice.

So to prevent the thinning of your tomato product, you really do not want to cut the tomato more than you have to. Small tomatoes cut in half. Large tomatoes cut into quarters. The pectin inside the tomatoes will thicken your sauce and minimize your time in front of a hot stove.

Advertisements

Tomato Paste

While I do have a few Italian Nona’s that I love watching on YouTube for inspiration, I want to try this Turkish recipe for making a tomato paste. With Turkish Food Travel, you can watch her video here or written recipe here.

A quick walking away point from this is that you notice that the pectin inside the tomatoes are at work in making this a thick sauce to start with. Then you keep the pan on the heat much longer than you would for a chunky tomato/pasta sauce. So if you’re making your own pasta sauce already, to make a paste you keep cooking the sauce down until you cook the vast majority of the liquid out.

I like how this recipe uses salt to reduce the tomato liquid even before you start cooking. This has inspired me to prep the tomatoes the night before I want to cook the paste, so the salt can maximize its extraction time.

At the end of the video you will hear about the method of making tomato paste by cooking it in the sun. Even though there was not enough description here, it sounds very similar to what I’ve heard is done in Italy. There are wooden tables that are used to make the paste. From what I understand, the sauce is first made and then spread across the wooden table. The sun dehydrates the tomatoes for you to make the paste. The only thing you do during this process is to use a scraper or a bench knife and mix the sauce/paste so that everything dehydrates/dries in the sun at an even rate.

If you are Italian, Turkish, or any nationality that makes a tomato paste using the sun, please comment below on the process that you use. Because I want to know how you do it. Making tomato paste by sun is on my cooking bucket list (I want to try this at least one time during my life).

Advertisements

Too Busy? Here’s some quick condiments that can fit in your busy life.

I just came across Becoming A Farm Girl and I’m excited to see what she has in store to share with the world. Here is her video on 7 Quick Condements. I love listening to Cassandra. Her approach for making mayonnaise is the easiest method that I’ve seen to date. And she’s made me super excited to make this the next time I run out of mayo. We’ve been meaning to make our own because of a couple of ingredients that have made their way onto the ingredient labels of commercial mayo.

To get her print out recipes you will need to sign up to Cassandra’s email list. The link to that is in the details of the video linked above. I did sign up to get this recipe book and it is beyond what I’ve received from others. So, if you’re picky about who you sign up for, I absolutely did not regret signing up for this one.

Looking for a tool to make your food prep easier?

This is an affiliate link to mentioned product. We may receive a commission on this product, purchased through this link, but at no extra cost to you. This item is from Amazon but may be purchased at local markets.

Processing…
Success! You're on the list.

Leave a comment

Advertisements
Advertisements

BFF Bacon Friends Forever

A few years ago, my oldest came home from school saying that he and one of his friends were BFFs. I asked him if he knew what that meant. He said, “Yes, mom, Bacon Friends Forever!”

I tried so hard not to laugh. He was serious. And it got me thinking about how no matter the culture people have always bonded together over food.

Today I want to talk about curing meat. If you are a non-pork eater (whether for religious or personal reasons) please stay with me here, because the curing of bacon is the same process as curing other meats. For example, Pastrami is made with beef using the same method (even with a different seasoning recipe). And you can even make Bacon using Beef as a substitute (there’s a recipe for this at the very end of the post).

The process of curing meat use to be common knowledge for all families before refrigerators were invented. In fact there are still many cultures around the world that still cure meat in their traditional ways. If you are interested in learning other methods 2 Guys & A Cooler is one channel that I follow. And what surprises me is just how similar all these other meat preserving methods are to making bacon.

Curing meats, in short, is the process of removing water from meat to make it shelf stable without refrigeration. This is done by using high amounts of salt.

The reason why salt works in preserving meat is because salt draws water out of the meat and creates a saline environment that makes the meat inhospitable to the growth of colonies of bacteria and mold.

Specific salamis are cured for a specific flavor brought from the controlled growth of certain mold. So, in this instance salt is the controlling agent to that mold growth.

I mention this before starting to show you how easy it is to cure meat because there are certain diets where it can be tempting to alter meat curing recipes. You need to keep the high salt content on order to not grow bacteria or mold on your meat, and making it dangerous to eat. There are methods to alter the saltiness of the meat later on in the curing process. So give me a moment, and I will come full circle back to salt levels.

Advertisements

Let’s Make Bacon!

There’s many bacon recipes found all over the internet. My husband and I have tried at least half a dozen. And that doesn’t include the experiments we made in trying to make our own. None of them compare to the recipe made by Jess Pryles, which is our go to recipe. The easiest way of describing it is to think of your favorite grocery store brand and multiplying your love for it a hundred times. Or think of the best bacon you had in a restaurant, and this bacon turns out better than even the finest restaurant. That’s how much we love this recipe. So this is the one I’m going to share with you because it’s not too sweet, not too spicy, smokes without burning or sticking to your smoker/grill, and the level of saltiness is easy to manage for your preference–both at the beginning of the curing process and at the end.

The Recipe

Bacon From Jess Pryles

  • 3 lb Skinless, Boneless Pork Belly
  • 3 Tbsp Kosher salt
  • 1/3 C White Sugar
  • 2 Tbsp Pepper
  • 2 tsp Paprika
  • 1 tsp Pink Curing Salt (Prague Powder #1)

This recipe can be multiplied in direct relation to the weight of the pork belly you are working with. See “Managing Saltiness” to see how you want to treat this ingredient as well as the pink curing salt.

Managing Saltiness

Before I move on to the process I want to briefly walk you through your first option of managing the saltiness of your bacon–or any cured meat for that matter. You have two options of salt to use: fine grain salt or rock salt.

Fine grain salt is your table salt, kosher salt, or any other salt that has been milled down to a fine powder. Because of how small the salt has been broken down into, the salt easily penetrates deep into the muscle tissue of the meat. This will give you a punch in the face saltiness level that you can further modify at the end of the curing process.

Rock salt is the crystal salt that you usually see in the store for sea salt or Himalayan salt. There’s a couple of other salt options out there that uses the crystals or rocks to put in your own spice grinder or mill. Because the rocks are obviously larger than the salt grains, it takes it longer for the saltiness to enter into the meat tissue. This process speeds up as the water is extracted from the meat and “melts” the salt crystal/rock. If you prefer cooking on the less salt is more spectrum if cooking, this is the salt you want to use. (I’m in this spectrum, so I always use this salt for curing meat.)

One more thing I want to address, before moving on to the process, is the pink salt ingredient. If you are nitrite or nitrate sensitive, you definitely want to leave out this ingredient. Pink curing salt is included in many recipes because it is preserving agent. Depending on how quickly you move (or don’t move) through a pork belly depends on if this is a necessary ingredient for you.

Without the pink curing salt, your bacon can be kept in your fridge for a couple weeks before spoiling. So if you go through a lot of bacon, that the pink curing salt really isn’t necessary. But if it will take you months to eat through pounds (however big your pork belly is) you will need to think of an alternative long term storage option, such as bagging up the bacon in your family’s serving sizes and storing in the freezer.

As a comparison note, we cured whole bellies with the pink curing salt, and life happened. We were unable to cook with the bacon like we thought we would and it took us almost three months to finish that batch. It’s instances like this where families might choose to use a pink curing salt. But making bacon has happened long before the manufacture and sales of pink curing salt.

Advertisements

Curing Container

There are a couple of different options you can go with when it comes to what you will contain your bacon in while curing. You can choose to use zip lock bags, closed container, or open container.

The open container is easy because everyone has one. There are a handful of drawbacks though. First, you keep the curing bacon in your fridge, so an open container leaves your meat vulnerable to flavor exchange with other foods. The bacon is also vulnerable to other contaminates, such as someone sneezing while looking in the fridge. And the water extracted from the meat gums up in the bottom of the container through the curing process.

A closed container is by far better in regards that it prevents all the draw backs of the open container. Plus, if you are a family that eliminates or minimizes the amounts of plastics in your house, this fits in your lifestyle. But the drawback for the average home kitchen, is that you might not have a large enough reusable container for your meat to lie flat. I do have a Pyrex casserole dish (which has a lid) that’s the perfect size for a 5lb pork belly. However it comes out of meal cooking circulation for a week.

Both of these options are great for their own reasons. However it’s important to note that these two containing methods will require that you handle the curing meat by hand or other kitchen utensil such as thongs. So if you have any food handling aversions, this might be your determining factor.

The other option is using plastic zip lock bags. You will have to cut the meat down to fit in a one gallon size bag. Or you can leave it whole if you have 2.5 gallon bags. This option gives you an automatic barrier for when it’s time to flip the meat and contain all the extracted water. It is also the most space saving method in the fridge, if space is the limiting factor. The drawback to this option is the dreaded bag failure. If the seal is not secure, you will have the extracted water leaking in your fridge.

If you are using a 3 lb pork belly, the 1 Gallon Zip Lock Bag will be large enough. We generally use a 6-9lb belly and need the 2.5 Gallon Bag.

This bag method has been my method of choice with littles in the house. It just minimizes the other potential could-go-wrongs that happen in a very active house where the kids love to help and be part of the cooking process.

The pictures you see throughout this post are from the bag method and closed container, but we have done all three. They all work. But the open container method also dries out the meat, so it definitely does not come out as tender as the other two methods.

The Process

  1. Measure out your seasoning ingredients (in direct relation to the weight of your pork) and set aside.
  2. Remove your Pork Belly from it’s wrappings (whether direct from a butcher or from a wholesale meat provider) and rinse it off to remove any juices that it may have had in its packaging.
  3. Season your meat with the seasoning ingredients, making sure that you have equal amounts on front and back, and all the ends. Be aware of all the creases in the meat and get the seasoning in there–the salt needs to be in here to make sure that all surface areas are covered in adequate salt. (If you are using the bag method, it’s easiest and cleanest to put the pork belly in the bag and season it in the bag. Seal up the bag once you’re finished.)
  4. Close your bag/container and place the pork belly in the fridge.
  5. For 7 whole days, flip the bacon over once in the morning and once in the evening.
  6. Once the 7 days are up, can remove the cured bacon from the fridge or let it continue curing for a few additional days.
  7. Remove the bacon from the bag/container and rinse off your pork belly. (See below for “Rinsing Advice”.)
  8. Now you will low and slow cook or smoke the pork belly, depending on what equipment you have available at your home. If all you have is your oven, set your oven on the lowest possible setting and cook the pork belly until you reach the internal temperature of 165°F. (See Below for “Cooking Options” to hear about the other ways you can cook/smoke the bacon.)
  9. Once you’ve reached the correct internal temperature, you will remove it from the heat source and put it on a plate/tray and cover it with foil and let the pork belly come to room temperature. (See “Tenting Options” below.)
  10. The room temperature pork belly can now be put in the fridge overnight. (See “Cutting Options” below)
  11. Slice the pork belly into the thickness of bacon you prefer, whether thick or thin.

You now have bacon!!!

Use this bacon just as you would with the bacon you’ve previously purchased from the butcher or local grocery store. If you are anything like my family, you will turn into a bacon snob and prefer the slices that you made over the store bought ones.

Rinsing Advice

This rinsing stage is going to look a little different for you depending on what type of salt that you chose to use.

As I mentioned above, my family likes the rock salt because we lean to the savory side of the food world, instead of the salty side. A generous rinsing off of the curing seasoning will leave a mild saltiness to it. A quicker rinse off is the maximum limit of our salt preference, but the starting off point for some of our family members.

If you choose to use a fine salt, a quick rinse is going to leave you with a salt bomb. (I did this once and that bacon was quickly reserved for soups and stews, and I don’t add any of the recipe’s called for salt. This bacon took care of the salt seasoning for the entire dish.) A generous rinse is what I consider a salt lover would prefer. But if you’re like our family of salt-less-is-more camp, but only have fine salt, I recommend filling a large bowl with clean water and letting the pork belly sit it for about a half hour or so. This is not going to undo the curing at all, but it will keep you from puckering from too-salty.

This is one ingredient that no one can tell you how to handle it, because everyone’s preferences are going to be all over the spectrum. So hopefully this section helps assists you in making salt choices that reflect your personal seasoning preference.

Advertisements

Cooking Options

We have cooked our pork bellies on our Traeger Grill and in a proper smoker. Both of these other cooking sources are great options, but our personal favorite is the smoker.

When it comes to grills, whether charcoal or propane, you want to use indirect heat. Even on the lowest setting/heat, it’s going to cook your bacon. This step should take no less than 3 hours. We are talking low and slow. And if you want to add that element of smoke flavor to your bacon, you can use a smoking chamber on your grill, like the one I have a link to below.

If you have a Traeger, or other grill that is a combo smoker, you want to keep your grill on the smoke setting and let the smoke cook your pork belly. It’s been a while since my husband smoked bacon on our Traeger, but he remembers it taking about 3-4 hours. Remember, this isn’t about time as much as it is about reaching that temperature of 165°F using just the heat from the smoke.

My husband loves the smoker that he found on a community “Free” page. This one allows you to customize your meat smoking experience better than a smoker/grill combo unit. His advice for using this cooking option is to soak your wood chips. At a bare minimum you soak them for 30 minutes, but 30-60 minutes is good. And in my ear, my husband is saying, “Do not soak grill pellets!” You definitely want the wood chips. And even with soaked chips, you still want to keep a tray of water in your smoker with your chips and meat. It keeps the humidity just right to keep the juices in your bacon.

The other advice that my husband popped in to give, is that if for whatever reason your pork belly just won’t come to temperature don’t worry. All you have to do is put it in your oven (lowest setting) and finish cooking it to 165°F.

Tenting Options

While this step can be omitted, you might consider to keeping it in your procedure. The tenting helps keep the steam in, instead of evaporating away while it cools down. My husband advocates that this is the secret that keeps his bacon from drying out.

If you want to tent your bacon but don’t want to use foil, you can use your lidded container (just don’t seal it).

Cutting Options

Here is where my husband and I have a slight difference of opinion. I have absolutely no problem slicing my bacon by hand. I’ve been slicing sandwich bread for over 3 years now, so I have a steady hand for this sort of thing. My husband prefers a meat slicer. Knife or machine, I’m an advocate for using what you have on hand.

We both do agree that letting the pork belly rest over night in the fridge is a huge step in your favor. If you slice your bacon at room temperature, you will more than likely find that it shifts on you and your blade slides out of place. By cooling the pork belly over night in the refrigerator, it firms the meat up and makes the slicing that much easier.


Why is it important to cure the pork belly for 7 days?

Depending on who you talk to, or where you look up information, you’re going to find a wide spectrum of curing time as an answer. But before I answer this question I want to make sure we’re on the same page about why we cure meat, in this case bacon.

All throughout history meat has been cured to preserve meat in a time before refrigeration was invented. In fact, many countries today still depend on curing to preserve meat. The enemy of meat (and food in general) is exposure to water, light, and heat. These three things degrade food, promote bacterial growth, and increase the chances of food borne illnesses. Salt is an amazing ingredient, because it changes (in this case) meat in such a way that water is removed and it creates an environment that bacteria does not like or live in.

In fact, in another scenario, I have the perfect example. The yeast that I use to make my bread, when I neglect it, starts to grow bacteria. The whole yeast culture is thrown off and smells horrible. However, this is the culture of wild yeast starter. You have a community here. When the community gets out of balance you have to make changes to bring it back into balance and make the community happy again. Salt does this. I toss in 2 tsp of salt into my out of balance starter, give it a good stir, and by the next day all is right in the world of my wild yeast starter. What happened? The salt changed the environment of the starter. The bacteria became unhappy and quit reproducing. Mean while, the yeast became happy and began to populate again or recovered from its illness (or however you want to look at it.)

Now a pork belly is so much larger than my quart size mason jar of yeast starter. It’s a thriving metropolis in comparison. It takes much longer for salt to infiltrate that pork belly and withdraw the water content of the belly. It takes time for the meat to cure and stabilize itself to withstand the threats to food preservation.

I saw one site say that it takes up to 24 hours to cure bacon using their method. The difference is that they have to inject the salt in deep throughout the pork belly. This method is not using an injection method. It is the meat bringing in the salt, and the salt working its way into the center of the belly. This takes time.

any2ndnow.com

There was another site that I saw claim that it only took 3 days to reach a “mild” cure. Food science being science, either it’s cured or it’s not cured. Cured meat is a process. It is a method. And the proof is behind the results on how the meat holds up over time. There’s nothing wrong with making salted pork. It doesn’t make it cured. It just means that it has a higher salt content that the meat that you pull out of your fridge or freezer. Please, let’s just call salted pork by its rightful name.

Can bacon be cured longer than 7 days? Absolutely! It’s not going to dry your pork belly out unless you’re using an open container. But that only happens because your fridge naturally evaporates water out of food that is left in there without being covered.

And let’s just be clear that evaporation or dehydration is not curing. Dehydration/evaporation is one method of preserving that is purely unique. Curing is an entirely different method of preservation, unique to itself. Every method has its own rules. Anything that doesn’t follow the rules is a different method for a different purpose.

Photo by Jeff Siepman on Pexels.com

I wanted to mention all of this because there were some friends of ours that we walked through the steps of how we cure our bacon. They stopped the curing step at three days and didn’t find the results that we said they should expect. There’s a couple of reasons why their first attempt of curing bacon didn’t turn out, so I can’t write definitively here what went wrong. I do know that we had shared from the same pork belly and the bacon had turned out with the above method. The two biggest suspicions I have is that not all the cuts and groves in the pork belly so the majority of the belly was working on becoming cured, but there were spots where bacteria had the opportunity to grow because the salt wasn’t there to make the meat an uninhabitable environment.

The other big potential of what went wrong is that the salt did not make it into the center of the meat. This is an important issue because remember, we are cooking low and slow. And since the center of meat is the last place to “cook”, this becomes a prime breeding ground for all sorts of potential food problems because salt wasn’t there to keep in check bad cultures. This then comes into realm of poor food handling.

I know that it’s tempting to take short cuts or speed things along quicker than described. We’ve all been there, especially when we’re excited to try a new skill and have great expectations. Please know that no matter how tempting it is, curing meats does take time. It can’t be rushed. And if you don’t believe me, you have to check out the link I have below for 2 Guys & A Cooler. They have amazing methods for making so many different cured meats that I can’t wait to get cracking to try. And what you see there just confirms what I’m saying that great meats take time.

Advertisements

Here are other recipes you may be interested in.

If you’re looking for a Beef Bacon (bypassing the pork all together), this is the recipe that I recommend. Disclosure, I have not tried this recipe yet. But this is the one that I have on hold for when I make that plunge.

If you’re interested in a Pastrami Recipe, this is the one that I have bookmarked.

2 Guys & A Cooler is definitely worth subscribing to if you’re looking at many other ways of curing meat. This link takes you to their video on making Biltong. I like their presentation because it all makes sense after making our own bacon for several years now.


This post contains affiliate links to products. We may receive a commissions on products purchased through these links, but at no extra cost to you. These items listed here are from Amazon but may be purchased at local markets.

If a smoker is not in your budget, this might be the tool to meet your needs.

Processing…
Success! You're on the list.

Leave a comment

Advertisements
Advertisements